Friday, 23 November 2012

The Kingston Shipyard - Minecraft Edition

Well, contrary to my previous post, time did not slow down enough at RMC to enable me to get more work done on the models. With my physical fleet scattered between RMC Kingston (and arriving in the new year) and Toronto, I have turned to Minecraft while out here in Victoria.


As such, Kingston Shipyard is being created within the digital world of Minecraft. The first (and quite lofty) project is the construction of a Battlestar-like vessel (as of yet unnamed), with full interior. As of writing, I have put about four days work into her, but subsequent work will be documented on a day-by-day basis. So, without further ado:

Framework:

The bulkhead framework took the better part of about six hours to complete. The vessel is, give or take, 150m long (presuming the Minecraft standard of one block equally 1m x 1m x 1m. At present she's looking to consist of seven decks, including the hangar and flight operations decks. Inspiration for the shape, as should be evident, is the Galactica, with a few alterations (such as the low-slung hangar instead of pod-mounted on the sides). Based on the ideas I have for the Shipyard at present, she will probably be a mid-range class in terms of size.
Bulkhead framework of the vessel.
Engines.

Hangar and Flight Ops:

The hangar and flight operations area are now enclosed by full hull plating. Spanning two large decks (about four decks high of regular size), it consists of a runway/launch ramp deck, and a hangar bay below, connected by (currently not working) elevators. There is hangar space for about twenty fighters, with room on the runway level for additional craft.

Hangar section enclosed in hull.


Runway, before being enclosed.

Elevators to hangar level.

Hangar control.
 On the hangar level is the hangar control room. This area would serve to oversee the logistics of supporting flight ops (refueling/rearming, etc). It is connected by ladder to the ladder system (shown in photo below, to the left) that extends up to the Flight Ops control room.

Speaking of Flight Ops, the control room above runway level oversees landing/take-off. It is positioned just aft of the launch ramp, and immediately forward of the end of the runway (presumably, this is the safest place for the control room in the event of an accident). The control room connects via a catwalk to the interior spaces of Flight Ops, such as the briefing room and heads.

Looking towards Flight Ops and launch ramp.

Catwalk to interior spaces (above), launch ramp (below).
 Fighters:

I decided to populate the runway and hangar with fighter craft. Due to the limitations of Minecraft, anything small will obviously have to look blocky and less sleek than I'd otherwise like. For show purposes, however, I think they do just fine.

Elevator and launch area populated by fighters. Fighter on elevator is being towed by small cart.

Fighter craft stands ready for takeoff.
 Flight Ops:

As mentioned, the interior spaces of Flight Ops connect to the hangar area via catwalk. This area consists of a locker room/heads for the pilots, a suit repair workshop, a flight planning room, and the briefing room itself.
Showers in the flight ops heads (interior spaces).

Yes, the heads even have toilets.

Briefing Room in flight ops.

Next Steps:

Now that the flight ops area has been sealed off and furnished, it's time to move forward. Next step will be constructing the engineering area aft, where the reactor and engineering control spaces will be. I'm anticipating this area to encompass the entire height of the craft, from the engines themselves forward about a fifth of the total space (the reactor and engines occupy a LOT of space).

Following that, I'll begin building deck-by-deck in the main body, including crew messes, galleys, workshops, etc. The black/green/black colour scheme seen in flight ops will change, based on the spaces occupied (i.e. engineering will be black/[colour]/black, weapons will be black/[colour]/black, etc, etc).

As I intend to work on this project fairly regularly (read: daily), it's likely that status updates will occur on a nightly basis. Stay tuned!

No comments:

Post a Comment